Frontier 350 LP1500SC software problem

The place to ask any question regarding any issue with your Fujifilm photofinishing equipment. Digital or analog.

Moderators: cj.ruiz, astramiello, mitrofanov_serge

Post Reply
a8o2ge
Newbie
Posts: 6
Joined: 30 Aug 2018, 13:45

30 Aug 2018, 14:08

Hello to all. I'm working with Frontier 350 standalone (without scanner). On DIC2 (S2, S3, S12 and S30 software) when I want to load pictures, this process takes a long time, about 2-3 minutes as if it was suspended. After this time it's gets faster and so on every order.

In the OM wait order i have 10579 orders in Wait Order - it's that normal? (this order's are completed) Maybe you've had a similar problem?

Thanks for any advice. Greeting from Poland.

Ps. Sorry for my english ;)
User avatar
yustas
Forum Admin
Posts: 101
Joined: 14 Nov 2017, 17:51
Location: Russia
Contact:

30 Aug 2018, 15:55

Please check a folder InSpool or Outspool on the disc D:/
Seems it is overloaded by old order files.
Send all of them to trash and have the folder empty.
minilablaser.com
Laser repair service
Diode laser modules
a8o2ge
Newbie
Posts: 6
Joined: 30 Aug 2018, 13:45

31 Aug 2018, 07:52

InSpool is empty and in OutSpool was DEVICE (inside was 4 files DEV0000*(1-4)) and Small folder. It's all deleted and without any effect. It's still loading photos for a long time.
User avatar
yustas
Forum Admin
Posts: 101
Joined: 14 Nov 2017, 17:51
Location: Russia
Contact:

04 Sep 2018, 14:37

I recommend installing MS Basic software to your minilab. It is much better than FE software, more flexible and user-friendly.
Please contact me if you need it.
minilablaser.com
Laser repair service
Diode laser modules
Post Reply