Hello.
Can you please help me to fix this minilab.
Pictures are green. No error messages.
I checked laser guns and all are ok.
I swap AOM. But no changes. I tried with one new AOM in both channels blue and green but no change.
What can be?
Noritsu 3501 Laser Problem
Moderators: cj.ruiz, astramiello
- yustas
- Forum Admin
- Posts: 101
- Joined: 14 Nov 2017, 17:51
- Location: Russia
- Contact:
If you change AOM driver and see no change - the most probable cause is a defective green laser module.
We can help you to have the problem solved by providing you with the brand new or upgraded laser module made on diode basis.
Please send me a message to info@minilablaser.com to receive a detailed information on the subject.
Thanks.
We can help you to have the problem solved by providing you with the brand new or upgraded laser module made on diode basis.
Please send me a message to info@minilablaser.com to receive a detailed information on the subject.
Thanks.
minilablaser.com
Laser repair service
Diode laser modules
Laser repair service
Diode laser modules
- yustas
- Forum Admin
- Posts: 101
- Joined: 14 Nov 2017, 17:51
- Location: Russia
- Contact:
Please join our club to receive a detailed recommendation on how to define the condition to the laser.
https://minilablaser.com/blog
https://minilablaser.com/blog
minilablaser.com
Laser repair service
Diode laser modules
Laser repair service
Diode laser modules