Paper Skewing (Zig Zag) Noritsu 3501

The place to ask any question regarding any issue with your Noritsu photofinishing equipment. Digital or analog.

Moderators: cj.ruiz, astramiello

Post Reply
dailysetup
Newbie
Posts: 4
Joined: 30 Nov 2017, 21:59

14 Jan 2018, 21:25

I am having this issue when my 3501 starts to print over 100 prints at one time. Anything less than 100 and it prints fine.
I have cleaned the pins on the arm unit, and the tracks. I have changed magazines and it is occurring on all paper types.
I have tried zigzag adjustment +1 and -1 and it still occurs. This is happening on the 152 paper only.

Image

Any suggestions?

Thanks
User avatar
yustas
Forum Admin
Posts: 101
Joined: 14 Nov 2017, 17:51
Location: Russia
Contact:

15 Jan 2018, 12:20

I think you should try to check the position of the paper in the paper magazine.
Sometimes it happens if something wrong there.
minilablaser.com
Laser repair service
Diode laser modules
davidlam
Forum Member
Posts: 41
Joined: 12 Dec 2017, 00:48

23 Jan 2018, 14:37

check internal metal bearings inside paper pressure rollers. . . location is after paper magazine exit. Good luck !
Post Reply